How to Reprogram a Skoda Key Fob
Many people ask how to reprogram a car key fob when they aren't sure why it stopped working. This is normal, as key fobs are often jostled around and buttons may become broken or stuck.
The first step is to try changing the battery. If you're not able to get it to work, it's time to get the replacement.
1. Turn the Ignition Off
If your key fob has stopped functioning recently, it's likely that the battery needs be replaced. Batteries are affordable and easy to replace. This should be the first step before trying to reprogram your key.
Check that the car has been turned off and all doors are closed. Then you can insert your current key into the ignition and switch it to "On" position. Do not switch off the engine.
Press the lock button on your keyfob within five minutes. You should hear the car's locks lock and unlock to confirm your success in entering programming mode. The Keylab can now use the key fob both to lock and unlock your car and also program other remotes. This process can also be used to reset a malfunctioning or damaged key fob. You may find that this is required when the key fob has been dropped, stepped on, or exposed to water.
2. Switch on the ignition.
There are only a few seconds to reprogram your key fobs correctly. First, you must switch on the ignition. This will reset your computer and give you a new start.
Close all the car doors. You shouldn't open any doors during this process because it could cause the program to be interrupted. After you have closed all the doors then turn the ignition to "On" and insert the key that is the primary one.
Press the lock button on the fob six times within 10 seconds after the engine has begun. If you hear the doors of your car unlocking, the mode of programming has been successful. Repeat the procedure for all other remotes you'll have to program. Be aware that you should program each remote as quickly as the previous one, as any delay could result in it failing.
3. Press the Lock Button
The key fob is an insignificant remote that can be used to lock and unlock the car. It also comes with a panic button that can be used to call for help in an emergency. There are many reasons why your key fob won't be functioning, such as batteries that are dead or damage to the buttons.
If the key fob isn't working properly, you can attempt to reprogram it by following the steps below. This process will work for most cars, but it is essential to follow the exact instructions in the vehicle's manual.
Start the process by turning on the car with the key in ignition but without turning on the motor. Hold down the "unlock" and "panic" buttons on the fob simultaneously for a few seconds. You should hear a clicking sound, which means the key fob was successfully programmed.
4. Press the Unlock Button
A new key fob must to be linked to your car to open and start it. You can do it yourself but you'll need to know some basics about how to program the Skoda key fob.
To unlock the door in your vehicle, you'll need utilize a long and slim tool. A wire coat hanger is often the best option because it's both thin and long.
Close your car doors after opening them. Press the fob's unlock button a few times. This will trigger a chime within your car. This lets you know that the fob's key was reprogrammed. After this you should be able to operate the lock and unlock buttons normally. If they don't, then you'll have to visit a dealership.
5. Press the Panic Button
The "Panic Button" on your key fob is an excellent feature to help you find your vehicle in crowded parking spaces. It's also an effective method to deter thieves. The button could even set off an alarm that is loud in your car, frightening away thieves who may believe they're a target.
If the panic button doesn't work after resetting your key fob, the battery may have been installed incorrectly. In this scenario the key fob battery will need to be replaced.
To do this, you need to open the key fob, and then separate the transmitter section from the main part. Remove the battery from the transmitter and replace it with a brand new one. Reassemble the key fob, and test its locking and unlocking functions. If this doesn't work you must repeat the reprogramming process or contact a locksmith near you.
6. Press the Lock Button
Updated April 17, 2023: If your key fob won't open doors, it might be time to replace the button cell battery. This little silver coin-shaped battery is usually simple to replace with the use of a small screwdriver or fingernail and is able to pop in and out.
Once you have a brand new battery Follow the steps to reprogram the key fob. Always close all doors, as opening a door can cause the process to be disrupted. After this is done you can turn the ignition back to "On", but do not start the engine.
Press the lock button on the key fob after five seconds following it has been programmed. You should hear a ring as the car locks turn and confirm the success of the process. Repeat this process to program additional remotes to the car. If the key fob not working, the issue could be due to a wiring or antenna fault, software issues or a damaged circuit board. It may be necessary to take it to a retailer to reprogramme it.